Slide Clamping Unit (Top)
Part. N° 28.0270/9
CAD DOWNLOAD ► 3D STEP | Solidworks 2013 | Inventor 2012
| APPLICATIONS |
|---|
| - Secure clamping of linear slides |
| - For use with manual & screw driven linear positioners |
| TECHN. DATA / ITEMS SUPPLIED | ||
|---|---|---|
| - Housing, aluminum, anodized | ||
| - Ratcheting hand lever, steel | ||
| - M8 left hand right hand threaded drive stud | ||
| -Replacement studs are available, Part # 28.0271 | ||
| - Qty 2 M8 square nuts for clamp lock | ||
| - Qty 3 M8 round washers, plastic | ||
| - Qty 2 M6x25 socket head cap screws | ||
| - Qty 2 M6 square nuts | ||
| -Qty 1 M4x5 set screw | ||
| - Weight | - .225 kg | |
Click here for full size animation
| ASSEMBLY |
|---|
| - Place one washer between M8 nuts for slides with a 2mm gap & two washers for slides with a 5mm gap and 3 for the LWN-S slide with an 8mm gap. Move left over washers to the top of the aluminum body. |
| - Adjust upper & lower M8 nuts on right hand left hand screw to clamp on t-slot lip at the same time |
| - Bolt aluminum body to slide |
| - Adjust handle on right hand left hand stud to remove slop |
| - Tighten M4x5 set screw last |